• Part: IDT54FCT16501ET
  • Manufacturer: Integrated Device Technology
  • Size: 140.43 KB
Download IDT54FCT16501ET Datasheet PDF
IDT54FCT16501ET page 2
Page 2
IDT54FCT16501ET page 3
Page 3

IDT54FCT16501ET Description

FAST CMOS 18-BIT REGISTERED TRANSCEIVER Integrated Device Technology, Inc. IDT54/74FCT16501AT/CT/ET IDT54/74FCT162501AT/CT/ET IDT54/74FCT162H501AT/CT/ET CMOS technology. These high-speed, low-power 18-bit registered bus transceivers bine D-type latches and D-type mon.

IDT54FCT16501ET Key Features

  • 0.5 MICRON CMOS Technology modes. Data flow in each direction is controlled by output- High-speed, low-power CMOS replac
  • Typical tSK(o) (Output Skew) < 250ps the device operates in transparent mode when LEAB is HIGH
  • Low input and output leakage ≤ 1µ A (max.) When LEAB is LOW, the A data is latched if CLKAB is held at
  • Packages include 25 mil pitch SSOP, 19.6 mil pitch CLKAB. OEAB is the output enable for the B port. Data flow TSSOP, 15.
  • Extended mercial range of -40°C to +85°C LEBA and CLKBA. Flow-through organization of signal pins
  • High drive outputs (-32mA IOH, 64mA IOL) improved noise margin
  • Power off disable outputs permit “live insertion” The FCT16501AT/CT/ET are ideally suited for driving
  • Typical VOLP (Output Ground Bounce) < 1.0V at high-capacitance loads and low-impedance backplanes. The VCC = 5V, TA = 25
  • Features for FCT162501AT/CT/ET: to allow "live insertion" of boards when used as backplane
  • Balanced Output Drivers: ±24mA (mercial), drivers. ±16mA (military) The FCT162501AT/CT/ET have balanced output drive