IR21064SPBF Datasheet | International Rectifier

Features - Floating channel designed for bootstrap operation - - - - - - - - Packages Fully operational to +600V Tolerant to negative transient voltage d V/dt immune Gate drive supply range from 10 to 20V (IR2106(4)) Undervoltage lockout for both channels 3.3V, 5V and 15V input logic patible Matched propagation delay for both channels Logic and power ground +/- 5V offset. Lower di/dt gate driver for better noise immunity Outputs in phase with inputs (IR2106) Also available LEAD-FREE 8-Lead SOIC 8-Lead PDIP 14-Lead SOIC 14-Lead PDIP Description 2106/2301//2108//2109/2302/2304Feature parison Cross The IR2106(4)(S) are high voltage, Input conduction Dead-Time Ground Pins Ton/Toff Part high speed power MOSFET and prevention logic IGBT drivers with independent high logic 2106/2301 and low side referenced output chan HIN/LIN no none 220/200 21064 VSS/ nels. Proprietary HVIC and latch 2108 Internal 540ns HIN/LIN yes 220/200 immune CMOS technologies enable Programmable 0.54~5µs 21084 VSS/ 2109/2302 Internal 540ns ruggedized monolithic construction. IN/SD yes 750/200 Programmable 0.54~5µs 21094 VSS/ The logic input is patible with yes 160/140 Internal 100ns HIN/LIN 2304 standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. Typical Connection VCC up to 600V HIN LIN VB HO VS LO TO LOAD HIN LIN IR2106 HO VCC HIN up to 600V V CC HIN LIN VB VS TO LOAD (Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and Design Tips for proper circuit board layout. IR21064 V SS V SS .irf. IR2106(4)(S) & (PBF) Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the...