Datasheet4U Logo Datasheet4U.com

SBB501S - VOLTAGE REGULATOR

General Description

The SBB Series point of load (POL) DC to DC voltage regulators are high reliability hermetically sealed thick film hybrids designed to provide a single regulated DC output from a DC voltage source.

The output power rating is 14W to 30W depending on output voltage, with maximum current rating of 14A.

Key Features

  •  Total Dose > 100 kRads(Si).
  •  SEE Hardened rated with LET > 82 MeV. cm2/mg.
  •  Operates from 4.5V to 5.5V DC supply.
  •  Fixed output voltage: 1V, 1.2V, 1.5V, 1.8V, 2.5V and 3.3V are standards.
  •  Output power up to 30W or 14A maximum without de-rating.
  •  High efficiency to 89%.
  •  Remote sense compensation.
  •  Fixed 400 kHz operating frequency.
  •  Output adjustable to ±10% of nominal output with an external resistor.
  •  Enable function pin for remote on/off con.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SBB5089 Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier Sirenza Microdevices
SBB5089Z Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier Sirenza Microdevices
SBB5089Z Cascadable Amplifier qorvo
SBB5089Z CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER RFMD
SBB-1089 Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier Sirenza Microdevices

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
SBB501R2S VOLTAGE REGULATOR
SBB501R5S VOLTAGE REGULATOR
SBB501R8S VOLTAGE REGULATOR
SBB502R5S VOLTAGE REGULATOR
SBB503R3S VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIGH RELIABILITY CLASS K HYBRID, RADIATION HARDENED, NON-ISOLATED POINT OF LOAD (POL) VOLTAGE REGULATOR PD-97563C SBB SERIES Single Output Description The SBB Series point of load (POL) DC to DC voltage regulators are high reliability hermetically sealed thick film hybrids designed to provide a single regulated DC output from a DC voltage source. The output power rating is 14W to 30W depending on output voltage, with maximum current rating of 14A. The POLs are class K qualified per MIL-PRF-38534. These products are designed to operate continuously on board a space craft up to the rated power output without power de-rating for case temperature of 85°C.