Datasheet4U Logo Datasheet4U.com

HFA3664 - 2.7GHz UpConverter with Gain Control

General Description

NAME LO_IN LO_BY PRE_IN PRE_OUT PRE_VCC1 PRE_VCC2 PRE_VCC3 BIAS_VCC MIX_VCC RX_PE TXM_RF IF_IN IF_BY GND Local Oscillator Input.

Local Oscillator Input Bypass (AC coupled to GND).

Power Pre-Amplifier Input.

Key Features

  • RF Frequency Range.
  • . . . . 2.3GHz to 2.7GHz.
  • IF Operation.
  • . 10MHz to 400MHz.
  • Gain Control Range.
  • .20dB.
  • Single Supply Operation.
  • . . 2.7V to 5.5V.
  • High Output 1dB Compression.
  • . . 6dBm.
  • High Power Gain.
  • . . .18dB.
  • Power Enable/Disable Control.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HFA3600 Low-Noise Amplifier/Mixer Renesas
HFA3046 Ultra High Frequency Transistor Arrays Renesas
HFA3096 Ultra High Frequency Transistor Arrays Renesas
HFA30PA40C Ultrafast Soft Recovery Diode nELL
HFA30PA60C Ultrafast Rectifier INCHANGE

Other Datasheets by Intersil (now Renesas)

Part Number Description
HFA3661 2.0GHz to 2.7GHz DownConverter
HFA3663 2.3GHz UpConverter with Gain Control
HFA3665 CDMA/AMPS Downconverter with AGC Capability
HFA3624 2.4GHz Up/Down Converter
HFA3683A 2.4GHz RF/IF Converter and Synthesizer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HFA3664 TM Data Sheet April 1999 File Number 4242.3 2.7GHz UpConverter with Gain Control The HFA3664 UpConverter with Gain Control is a monolithic bipolar PRISM® device for up conversion applications in the 2.3GHz to 2.7GHz range. Manufactured in the Intersil UHF1X process, the device consists of a double balanced mixer followed by a variable gain power preamp. An energy saving, TTL Compatible, power enable input provides on/off bias current control to the mixer and amplifier. The device requires low drive levels from the local oscillator and is housed in a small outline 20 lead SSOP package ideally suited for PCMCIA card applications. Features • RF Frequency Range . . . . . . . . . . . . . . 2.3GHz to 2.7GHz • IF Operation . . . . . . . . . . . . . . . . . . . . .