Datasheet4U Logo Datasheet4U.com

HIP1090 Datasheet Protected High Side Power Switch With Transient Suppression

Manufacturer: Intersil (now Renesas)

Overview: HIP1090 March 1995 Protected High Side Power Switch with Transient.

General Description

The HIP1090 is a Protected Power Interface Switch designed to suppress potentially damaging over-voltage transients with peak voltage source inputs ranging up to ±90V in amplitude.

It is designed to be operated in a ‘hardwired’ pass-thru mode or as a high side power switch which controls the current flow through a PNP pass transistor of the IC.

In either mode The HIP1090 has a low saturated forward voltage drop.

Key Features

  • ±90V Transient Suppression 4V to 16V Operating Voltage 1A Current Load Capability Low Input-Output Voltage Drop With Controlled Saturation Detector for - Fast Low Current Turn-OFF - Reduced No-Load Idle Current Over-Voltage Shutdown Protection Short Circuit Current Limiting Over-Temperature Limiting Protected Thermal Limiting at TJ = +150oC.
  • -40oC to +125oC Operating Temperature Range.

More Datasheets from Intersil (now Renesas)

Part Number Description
HIP1030 1A High Side Driver with Overload Protection
HIP1031 Half Amp High Side Driver with Overload Protection
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
HIP2106 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver
HIP4011 Three Phase Brushless DC Motor Controller
HIP4081 80V/2.5A Peak/ High Frequency Full Bridge FET Driver
HIP5010 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5011 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5015 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge
HIP5016 7V/ 7A SynchroFET Complementary Drive Synchronous Half-Bridge

HIP1090 Distributor