Datasheet4U Logo Datasheet4U.com

HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver

General Description

PIN NUMBER 1 2 3 4 5 6 7 8 SYMBOL VDD HB HO HS HI LI VSS LO DESCRIPTION Positive Supply to lower gate drivers.

De-couple this pin to VSS (Pin 7).

Bootstrap diode connected to HB (pin 2).

Key Features

  • Drives N-Channel MOSFET Half Bridge.
  • Space Saving SO8 Package.
  • Bootstrap Supply Max Voltage to 116VDC.
  • On-Chip 1Ω Bootstrap Diode.
  • Fast Propagation Times Needed for Multi-MHz Circuits.
  • Drives 1000pF Load at 500kHz with Rise and Fall Times of Typically 20ns.
  • CMOS Input Thresholds for Improved Noise Immunity.
  • Independent Inputs for Non-Half Bridge Topologies.
  • No Start-Up Problems.
  • Outputs Unaffected by Suppl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HIP2106A Low Voltage Driver Renesas
HIP2100 High Frequency Half Bridge Driver Renesas
HIP2101 High Frequency Half Bridge Driver Renesas
HIP2103 Half Bridge Driver Renesas
HIP2104 Half Bridge Driver Renesas

Other Datasheets by Intersil (now Renesas)

Part Number Description
HIP0063 Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control
HIP1030 1A High Side Driver with Overload Protection
HIP1031 Half Amp High Side Driver with Overload Protection
HIP1090 Protected High Side Power Switch with Transient Suppression
HIP4011 Three Phase Brushless DC Motor Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIP2106 Data Sheet August 1999 File Number 4406.2 100V/1A Peak, Low Cost, High Frequency Half Bridge Driver The HIP2106 is a high frequency, 100V Half Bridge N-Channel MOSFET driver IC, available in 8 lead plastic SOIC. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver protocol. Undervoltage protection on both the low-side and high-side supplies force the outputs low. An on-chip diode eliminates the discrete diode required with other driver ICs. A new levelshifter topology yields the low-power benefits of pulsed operation with the safety of DC operation.