HS9-1254RH-Q Datasheet | Intersil

HS-1254RH PRELIMINARY April 1998 Radiation Hardened, High Speed, Low Power Dual Operational Amplifier with Disable Description The HS-1254RH is a ±5V, Rad Hard, monolithic, dual, current feedback amplifier that provides highly reliable performance in harsh radiation environments. Dielectric isolation and bonded wafer processing make this device immune to latch-up (SEL). Excellent dynamic characteristics, coupled with the disable function, make this amplifier well-suited for a variety of satellite system applications. The outputs have individual disable control pins that make it easy to multiplex wideband signals, putting the outputs in a high impedance mode and reducing the supply current per op amp down to 3m A (typical). Post radiation limits are fully specified and guaranteed to 300k RAD(Si) total dose to ensure predictable performance in any space application. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). SMD numbers must be used when ordering. Detailed Electrical Specifications for the HS-1254RH are contained in SMD 5962-98581, which is easily downloadable from our website, via a DSCC “hot-link”. http://.semi.intersil./data/sm/index.htm Features - QML Qualified Per MIL-PRF-38535 Requirements - Radiation Environment - Total Dose - - - - . 3 x 105 RAD(Si) - SEL Immune - - . Bonded Wafer DI Process - Low Quiescent Current (per amp) - . 6.1m A (Max) - Disabled Supply Current (per amp) - 4.0m A (Max) - Low Offset Voltage- - - . . . . 5.0m V (Max) - Output Enable/Disable Time - . . 160ns/20ns (Typ) - High Slew Rate - - - . . . . 1050V/µs (Typ) - Wide -3d B Bandwidth (AV = +2) - . . 530MHz (Typ) Applications - High Speed A/D Drivers - Cable...