HS9-139RH-T Datasheet | Intersil

HS-139RH-T Data Sheet July 1999 File Number Radiation Hardened Quad Voltage parator Intersil’s Satellite Applications Flow TM (SAF) devices are fully tested and guaranteed to 100k RAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. The Radiation Hardened HS-139RH-T consists of four independent single or dual supply voltage parators on a single monolithic substrate. The mon mode input voltage range includes ground, even when operated from a single supply, and the low supply current make these parators suitable for low power applications. These types were designed to directly interface with TTL and CMOS. The HS-139RH-T is fabricated on our dielectrically isolated Rad Hard Silicon Gate (RSG) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment. Features - QML Qualified Per MIL-PRF-38535 Requirements - Radiation Environment - Latch-up Free Under Any Conditions - Total Dose- - - - . . . 3 x 105 RAD(Si) - SEU LET - - - - . . . 20MEV/cm2/mg - 100V Output Voltage Withstand Capability - Differential Input Voltage Range Equal to the Supply Voltage - Input Offset Voltage (VIO)- - - . . 2m V(max) - Quiescent Supply Current - - - . 2m A(max) Applications - Pulse Generators - Timing Circuitry - Level Shifting - Analog to Digital Conversion Specifications Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed below must be used when ordering. Detailed Electrical Specifications for the HS-139RH-T are contained in SMD 5962-98613. A “hot-link” is provided on our homepage with instructions for downloading. .intersil./spacedefense/newsafc...