JVD75B Datasheet | Jauch Quartz Gmbh

Oscillator - LVDS - VCXO SMD LVDS VCXO - 7.5 x 5.0 mm actual size - - - - uses quartz crystal at fundamental mode and PLL high pulling range ± 150 ppm plementary LVDS output, low EMI ceramic/metal package .. 2002/95/EC Ro HS pliant Pb free: pins / pads Ro HS General Data type frequency range frequency stability over all- frequency pulling range min. pulling control voltage pulling control input imped. min. current consumption supply voltage VDC temperature operating storage output rise & fall time load nom. swing min. offset voltage standby function output enable time max. output disable time max. start-up time max. phase jitter 12 k Hz ~ 20.0 MHz symmetry at 50% of Vpp JVD75B 12.0 ~ 800.0 MHz ± 25ppm / ± 50ppm (see table 1) ± 150ppm 1.65 V ± 1.5 V 60 kΩ 80m A max. 3.3 V ± 5% -10 °C ~ +70 °C / -40 °C ~ +85 °C -40 °C ~ +85 °C 1.0ns (20% ~ 80% of Vpp) 100Ω differential 0.35Vp-p 1.25 V ± 0.125V yes 10ms 150ns 10ms < 5.0ps RMS 45% ~ 55% typ. (40% ± 60% max.) - Table 1: Frequency Stability Code stability code B ± 50 ppm -10 °C ~ +70 °C -40 °C ~ +85 °C O O O available C ± 25 ppm O - standard - includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. Enable / Disable Function pin #2 (e/d control) open or ≥ 2.4 V gnd or ≤ 0.4 V pin #4 / #5 (outputs) active high impedance Control Voltage Characteristic ppm 3.3 control voltage (V) - To avoid phase noise or FM modulation in the output frequency spectrum, we remend to feed the Vcontrol input pin by a low source impedance. Dimensions 7.5 max. #6 #5 #4 5.0 max. 2 x 2.54 2 x 2.54 1.6 max. #1 #2 #3 #1 0.1 top view side view bottom view pad...