K24C04 Datasheet PDF

K-Line K24C04

The K24C04 uses the A2 and A1 inputs for hard wire addressing and a total of four 4K devices may be addressed on a single bus system. The A0 pin is a no connect and can be connected to ground. The K24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system.

Part No.	K24C04
Datasheet	K24C04 Download
Manufacturer	K-Line
Description	EEPROM
Buy	Stock & Price

FEATURES

Wide Voltage Operation - VCC = 1.8V to 5.5V Operating Ambient Temperature: -40。 C to +85。 C Internally Organized: - K24C02, 256 X 8 (2K bits) - K24C04, 512 X 8 (4K bits) - K24C08, 1024 X 8 (8K bits) - K24C16, 2048 X 8 (16K bits) 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility Write Protect Pin for Hardware Data Protection 8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes Partial Page Writes Allowed Self-timed Write Cycle (5 ms max) High-reliability - Endurance: 1 Million Write Cycles - Data Retention: 100 Years Two-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppression Bidirectional Data Transfer Protocol

GENERAL DESCRIPTION

8-lead PDIP, 8-lead SOP and 8-lead TSSOP Packages Die Sales: Wafer Form, Waffle Pack The K24C02/K24C04/K24C08/K24C16 provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.