K24C08 Datasheet PDF

K-Line K24C08

The K24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects and can be connected to ground. The K24C16 does not use the device address pins, which limits the number of devices on a single bus to one.

Part No.	K24C08
Datasheet	K24C08 Download
Manufacturer	K-Line
Description	EEPROM
Buy	Stock & Price

FEATURES

Wide Voltage Operation - VCC = 1.8V to 5.5V Operating Ambient Temperature: -40。 C to +85。 C Internally Organized: - K24C02, 256 X 8 (2K bits) - K24C04, 512 X 8 (4K bits) - K24C08, 1024 X 8 (8K bits) - K24C16, 2048 X 8 (16K bits) 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility Write Protect Pin for Hardware Data Protection 8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes Partial Page Writes Allowed Self-timed Write Cycle (5 ms max) High-reliability - Endurance: 1 Million Write Cycles - Data Retention: 100 Years Two-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppression Bidirectional Data Transfer Protocol

GENERAL DESCRIPTION

8-lead PDIP, 8-lead SOP and 8-lead TSSOP Packages Die Sales: Wafer Form, Waffle Pack The K24C02/K24C04/K24C08/K24C16 provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.