KK74AC138 - 1-of-8 Decoder/Demultiplexer High-Speed Silicon-Gate CMOS

KODENSHI KOREA

Key Features

three Chip Select inputs, two active-low and one active-high to facilitate the demultiplexing, cascading, and chipselecting functions. The demultiplexing function is accomplished by using the Address inputs to select the desired device output; one of the Chip Selects is used as a data input while the other Chip Selects are held in their active states.
Outputs Directly Interface to CMOS, NMOS, and TTL.
Operating Voltage Range: 2.0 to 6.0 V.
Low Input Current: 1.0 µA; 0.

KK74AC138 1-of-8 decoder/demultiplexer high-speed silicon-gate cmos by KODENSHI KOREA - Datasheet Preview

Datasheet Details

Part number	KK74AC138
Manufacturer	KODENSHI KOREA
File Size	398.73 KB
Description	1-of-8 Decoder/Demultiplexer High-Speed Silicon-Gate CMOS
Datasheet	KK74AC138 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
KK74AC574	Octal 3-State	KODENSHI

Other Datasheets by KODENSHI KOREA

Part Number	Description
KK74AC132	Quad 2-Input NAND Gate
KK74AC139	Dual 1-of-4 Decoder/Demultiplexer High-Speed Silicon-Gate CMOS
KK74AC10	Triple 3-Input NAND Gate High-Speed Silicon-Gate CMOS
KK74AC109	Dual J-K Flip-Flop
KK74AC11	Triple 3-Input AND Gate High-Performance Silicon-Gate CMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TECHNICAL DATA www.DataSheet4U.com KK74AC138 1-of-8 Decoder/Demultiplexer High-Speed Silicon-Gate CMOS The KK74AC138 is identical in pinout to the LS/ALS138, HC/HCT138. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. The KK74AC138 decodes a three-bit Address to one-of-eight activelow outputs. This device features three Chip Select inputs, two active-low and one active-high to facilitate the demultiplexing, cascading, and chipselecting functions. The demultiplexing function is accomplished by using the Address inputs to select the desired device output; one of the Chip Selects is used as a data input while the other Chip Selects are held in their active states.