KK74AC174 Datasheet | Kodenshi AUK Group

TECHNICAL DATA .. Hex D Flip-Flop with mon Clock and Reset High-Speed Silicon-Gate CMOS The KK74AC174 is identical in pinout to the LS/ALS174, HC/HCT174. The device inputs are patible with standard CMOS outputs; with pullup resistors, they are patible with LS/ALS outputs. This device consists of six D flip-flops with mon Clock and Reset inputs. Each flip-flop is loaded with a low-to-high transition of the Clock input. Reset is asynchronous and active-low. - Outputs Directly Interface to CMOS, NMOS, and TTL - Operating Voltage Range: 2.0 to 6.0 V - Low Input Current: 1.0 µA; 0.1 µA @ 25°C - High Noise Immunity Characteristic of CMOS Devices - Outputs Source/Sink 24m A ORDERING INFORMATION KK74AC174N Plastic KK74AC174D SOIC TA = -40° to 85° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs Reset L PIN 16=VCC PIN 8 = GND H H H H X = Don’t care L Clock X D X H L X X Output Q L H L no change no change .. MAXIMUM RATINGS- Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL - Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -0.5 to VCC +0.5 -0.5 to VCC +0.5 ±20 ±50 ±50 750 500 -65 to +150 260 Unit V V V m A m A m A m W °C °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Remended Operating Conditions. +Derating - Plastic DIP: - 10 m W/°C from 65° to 125°C SOIC Package: : - 7 m W/°C from 65° to 125°C REMENDED OPERATING CONDITIONS Symbol VCC VIN, VOUT TJ TA IOH IOL tr, tf Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Junction Temperature (PDIP) Operating...