KKA2003 Datasheet | Kodenshi AUK Group

DESCRIPTION The main features of KKA2003, are very low number of external ponents, easy of assembly, space and cost saving. The device provides a high output current capability (up to 3.5A), very low harmonic and cross-over distortion. pletely safe operation is guaranteed due to protection against DC and AC short circuit between all pins and ground, thermal over-range, load dump voltage up to 40V and open ground. TO 220 AB/5 PENTAWATT ORDERING NUMBERS : KKA2003 ABSOLUTE MAXIMUM RATINGS Symbol Vs Vs Vs Io Io Ptot Tstg,Tj Parameter Peak supply voltage (50 ms) DC supply voltage Operating supply voltage Output peak current (repetitive) Output peak current (non repetitive) Power dissipation at Tcase =90°C Storage and junction temperature Value 40 28 18 3.5 4.5 20 -40 to 150 Unit V V V A A W °C PIN CONNECTION .. THERMAL DATA Symbol Rth-j-case Parameter max Value Unit °C/W Thermal resistance junction-case ELECTRICAL CHARACTERISTICS (Vs = 14.4V, Tamb =25 °C unless otherwise specified) Symbol Parameter Test conditions Min. Typ. Max. Unit DC CHARACTERISTICS Vs Supply voltage Vo Id Quiescent output voltage (pin 4) Quiescent drain current (pin 5) 8 6.1 6.9 44 18 7.7 50 V V m A AC CHARACTERISTICS Po Output power d = 10% f = 1 k Hz RL =4Ω RL =2Ω RL = 3.2Ω RL = 1.6Ω 5.5 9 6 10 7.5 12 W W W W m V m V m V m V m V Hz % % kΩ d B d B 40,3 5 200 d B µV p A % % d B Vi(rms) Vi Input saturation voltage Input sensitivity f = 1 k Hz Po = 0.5W RL =4Ω Po =6W RL =4Ω Po = 0.5W RL =2Ω Po 10W RL =2Ω Po =1W RL =4Ω f = 1 k Hz Po = 0.05 to4.5W RL =4Ω Po = 0.05 to7.5W RL =2Ω f = 1 k Hz f = 1 k Hz f = 10 k Hz f = 1 k Hz RL =4Ω f = 1 k Hz Po =6W RL =4Ω Po 10W RL =2Ω f = 100 Hz Vripple = 0.5V Rg =10 kΩ RL =4 Ω 300 14 55 10 50 40 to 15000 0,15 0,15 150 80 60 40 1 60 69 65 30...