APHBM2012SURKCGKC
APHBM2012SURKCGKC is SMD Chip LED Lamp manufactured by Kingbright.
FEATURES
2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free Ro HS pliant
APPLICATIONS
Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications
REMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
ATTENTION
Observe precautions for handling electrostatic discharge sensitive devices
SELECTION GUIDE
Part Number
Emitting Color (Material)
- Hyper Red (Al Ga In P)
- Green (Al Ga In P)
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%.
- Luminous intensity value is traceable to CIE127-2007 standards.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
Lens Type Water Clear
Iv (mcd) @ 20m A [2]
Min.
Typ.
- 40
- 80
- 20
- 50
Viewing Angle [1] 2θ1/2
120°
© 2021 Kingbright. All Rights Reserved. Spec No: DSAG7623 / 1203005979 Rev No: V.17A Date: 06/07/2021
Page 1 / 4
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20m A
λpeak
Hyper Red Green
Dominant Wavelength IF = 20m...
