MKT-68 Datasheet | Konek

.. CAPACITORS KONEK METALLIZED POLYESTER FILM CAPACITOR TYPICAL APPLICATIONS: Filter and noise suppression circuit in low voltage application, blocking, coupling, by-pass, energy storage Features : Highly reliability, non-inductive, self-healing properties, flat style, hight moisture resistance, good solderability. MARKING: Manufacturer’s logo, capacitance, tolerance, rated voltage and. type DIELECTRIC: Polyester film. ELECTRODES: Aluminium layer deposited by evaporation under vacuum. CONSTRUCTION: Metallized polyester film, non inductive, radial leads, and coated in epoxy resin. LEADS: Tinned wire. OPERATING TEMP. RANGE: From -55ºC to +105 (At 105ºC with 75% of rated voltage) CAPACITANCE RANGE: 0.01 µF to 22 µF CAPACITANCE TOLERANCE: 20%, 10%, 5% RATED VOLTAGE: 63VDC, 100VDC, 160VDC, 250VDC, 400VDC, 630 VDC, 1000VDC PITCH: 10, 15, 22.5, 27.5 (mm) PITCH TOLERANCE: 10, 15: ±0,5mm 22.5, 27.5: ±1mm DISSIPATION FACTOR: Tgδ ≤130 ⋅10-4 (10 KHz, 25ºC) Tgδ ≤100 ⋅10-4 (1 KHz, 25ºC) INSULATION RESISTANCE: ≥15,000 MΩ for C≤0.33µF ≥5,000 s for C>0.33µF WITHSTAND VOLTAGE: Rated voltage (VDC) x 1.5 for 60 s RESISTANCE TO SOLDERING HEAT: Body temperature: 100ºC Bath temperature: 260ºC ± 5ºC BASIC SPECIFICATIONS: IEC 60384-2 CECC 30400 PITCH (mm) 10 15 22,5 27,5 100Vdc 28 20 8 7 d V/dt (V/us) 250Vdc 400Vdc 70 110 28 44 12 20 10 16 630Vdc 70 70 28 24 .konek. MKT-68 konek@konek. Revision 26-Jul-06 .. CAPACITORS KONEK STANDARD PRODUCTS AND CASE SIZE TABLE (mm) CAP µF 0.001 0.0047 0.0047 0.01 0.01 0.015 0.022 0.033 0.047 0.068 0.068 0.068 0.1 0.1 0.1 0.15 0.15 0.15 0.22 0.22 0.22 0.33 0.33 0.33 0.47 0.47 0.47 0.68 0.68 0.68 1 1 1 1 1.5 1.5 1.5 2.2 2.2 2.2 3.3 3.3 4.7 4.7 6.8 10 PITCH (mm) 10 10 15 10 15 10 10 10 10 15 10 15 10 15 22.5 10 15 22.5 10 15 22.5 10 15 22.5 10 15 22.5 15 22.5 27.5 10 15 22.5 27.5 15 22.5 27.5 15 22.5 27.5 22.5 27.5 22.5 27.5 27.5 27.5 100VDC T Hr 250VDC T Hr 400VDC T...