LTC1164 Datasheet | Linear Technology

Low Power, Low Noise, Quad Universal Filter Building Block Features - Low Power - 4 Filters in a 0.3" Wide Package - 1/2 the Noise of the LTC1059, 60, 61 Devices - Wide Output Swing - Clock-to-Center Frequency Ratios of 50:1 and 100:1 - Operates from ±2.37V to ±8V Power Supplies - Customized Version with Internal Resistors Available - Ratio of 50:1 and 100:1 Simultaneously Available U APPLICATIO S - Antialiasing Filters - Tele Filters - Spectral Analysis - Loop Filters - For Fixed Lowpass Filter Requirements use the LTC1164-XX Series , LTC and LT are registered trademarks of Linear Technology Corporation. LTCMOS trademark of Linear Technology Corporation. DESCRIPTIO The LTC®1164 consists of four low power, low noise 2nd order switched capacitor filter building blocks. Each building block typically consumes 850µA supply current. Low power is achieved without sacrificing noise and distortion. Each building block, together with 3 to 5 resistors, can provide 2nd order functions like lowpass, highpass, bandpass, and notch. The center frequency of each 2nd order section can be tuned with an external clock, or a clock and resistor ratio. For Q < 5, the center frequency range is from 0.1Hz to 20k Hz. Up to 8th order filters can be realized by cascading all four 2nd order sections. Any classical filter realization (such as Butterworth, Cauer, Bessel, and Chebyshev) can be formed. A customized monolithic version of the LTC1164 including internal thin film resistors can be obtained. Consult LTC Marketing for details. The LTC1164 is manufactured using Linear Technology’s enhanced LTCMOS™ silicon gate process. TYPICAL APPLICATIO Dual 5th Order Linear Phase Filter with Stopband Notch 549k 63.4k 210k VIN1 102k 133k 174k 1 2 3...