LTC1627 Datasheet | Linear Technology

LTC1627 Monolithic Synchronous Step-Down Switching Regulator Features s s s s s s s s s s s DESCRIPTION The LTC®1627 is a monolithic current mode synchronous buck regulator using a fixed frequency architecture. The operating supply range is from 8.5V down to 2.65V, making it suitable for one or two lithium-ion battery-powered applications. Burst Mode operation provides high efficiency at low load currents. 100% duty cycle provides low dropout operation, which extends operating time in battery-operated systems. The operating frequency is internally set at 350k Hz, allowing the use of small surface mount inductors. For switching noise sensitive applications it can be externally synchronized up to 525k Hz. The SYNC/FCB control pin guarantees regulation of secondary windings regardless of load on the main output by forcing continuous operation. Burst Mode operation is inhibited during synchronization or when the SYNC/FCB pin is pulled low to reduce noise and RF interference. Soft-start is provided by an external capacitor. Optional bootstrapping enhances the internal switch drive for single lithium-ion cell applications. The internal synchronous switch increases efficiency and eliminates the need for an external Schottky diode, saving ponents and board space. The LTC1627 es in an 8-lead SO package. , LTC and LT are registered trademarks of Linear Technology Corporation. Burst Mode is a trademark of Linear Technology Corporation. s s s s U APPLICATIONS s s s s s s s High Efficiency: Up to 96% Constant Frequency 350k Hz Operation 2.65V to 8.5V VIN Range VOUT from 0.8V to VIN, IOUT to 500m A No Schottky Diode Required Synchronizable Up to 525k Hz Selectable Burst Mode TM Operation Low Dropout Operation: 100% Duty Cycle Precision 2.5V Undervoltage Lockout Secondary Winding Regulation Current Mode Operation for Excellent Line and Load Transient Response Low Quiescent Current: 200µA Shutdown Mode Draws Only 15µA Supply Current ±1.5% Reference Accuracy Available in...