LTC3728 Datasheet | Linear Technology

Features n Dual, 180° Phased Controllers Reduce Required Input Capacitance and Power Supply Induced Noise n OPTI-LOOP® pensation Minimizes COUT n ±1% Output Voltage Accuracy n Power Good Output Voltage Indicator n Phase-Lockable Fixed Frequency 250k Hz to 550k Hz n Dual N-Channel MOSFET Synchronous Drive n Wide VIN Range: 3.5V to 36V Operation n Very Low Dropout Operation: 99% Duty Cycle n Adjustable Soft-Start Current Ramping n Foldback Output Current Limiting n Latched Short-Circuit Shutdown with Defeat Option n Output Overvoltage Protection n Remote Output Voltage Sense n Low Shutdown IQ: 20μA n 5V and 3.3V Regulators n 3 Selectable Operating Modes: Constant-Frequency, Burst Mode® Operation and PWM n Available in 32-Pin 5mm × 5mm QFN and 28-Pin SSOP Packages APPLICATIONS n Notebook and Palmtop puters n Tele Systems n Portable Instruments n Battery-Operated Digital Devices n DC Power Distribution Systems Dual, 550k Hz, 2-Phase Synchronous Step-Down Switching Regulator DESCRIPTION The LTC®3728 is a dual high performance step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant-frequency current mode architecture allows phase-lockable frequency of up to 550k Hz. Power loss and noise due to the ESR of the input capacitors are minimized by operating the two controller output stages out of phase. OPTI-LOOP pensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The precision 0.8V reference and power good output indicator are patible with future microprocessor generations, and a wide 3.5V to 30V (36V maximum) input supply range enpasses all battery chemistries. A RUN/SS pin for each controller provides both softstart and optional timed, short-circuit shutdown. Current foldback limits MOSFET dissipation during short-circuit conditions when overcurrent latchoff is disabled. Output overvoltage protection circuitry latches on the bottom...