Datasheet4U Logo Datasheet4U.com

MD-160 - Termination Insensitive Mixer

This page provides the datasheet information for the MD-160, a member of the MD-160-MA Termination Insensitive Mixer family.

Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Features

  • Third Order Intermodulation Ratio is Insensitive to Port Mismatches.
  • Conversion Loss: 7 dB Typical Midband.
  • VSWR: Typically Less than 1.5:1 @ Midband.
  • Impedance: 50 Ohms Nominal.
  • Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.5 mW/°C.
  • MIL-STD-883 Screening Available.

📥 Download Datasheet

Datasheet preview – MD-160

Datasheet Details

Part number MD-160
Manufacturer MA-COM
File Size 446.87 KB
Description Termination Insensitive Mixer
Datasheet download datasheet MD-160 Datasheet
Additional preview pages of the MD-160 datasheet.

📁 Similar Datasheet

  • MD-169 - Termination Insensitive Mixer (Tyco)
  • MD-169 - Termination Insensitive Mixer (MACOM)
  • MD-113 - High Performance Double-Balanced Mixer (Tyco)
  • MD-124 - Double-Balanced Mixer (Tyco)
  • MD-156 - Flatpack Double-Balanced Mixer (Tyco)
  • MD-158 - Double-Balanced Mixer (Tyco)
  • MD-179 - Termination Insensitive Mixer (Tyco Electronics)
  • MD-179 - Termination Insensitive Mixer (MACOM)
  • MD-2070 - STEREO MINIDISC RECORDER INSTRUCTION MANUAL (Kenwood)
  • MD-2310 - Single Digit 7-Segment Numeric Display (MIKWANG)
Other Datasheets by MA-COM
  • MD-161 - Termination Insensitive Mixer
  • MD-108 - Double-Balanced Mixer
  • MD-123 - Double-Balanced Mixer
  • MD-124 - Double-Balanced Mixer
  • MD-140 - Double-Balanced Mixer
  • MD-148 - Double-Balanced Mixer
  • MD-149 - Double-Balanced Mixer
  • MD-158 - Termination Insensitive Mixer

Full PDF Text Transcription

Click to expand full text
MD-160 Termination Insensitive Mixer, 1 - 1500 MHz Features  Third Order Intermodulation Ratio is Insensitive to Port Mismatches  Conversion Loss: 7 dB Typical Midband  VSWR: Typically Less than 1.5:1 @ Midband  Impedance: 50 Ohms Nominal  Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.5 mW/°C  MIL-STD-883 Screening Available Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.
Published: |