Datasheet4U Logo Datasheet4U.com

MD-161 - Termination Insensitive Mixer

Download the MD-161 datasheet PDF. This datasheet also covers the MD-161-MA variant, as both devices belong to the same termination insensitive mixer family and are provided as variant models within a single manufacturer datasheet.

General Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Key Features

  • Third Order Intermodulation Ratio is Insensitive to Port Mismatches.
  • Conversion Loss: 6dB Typical Midband.
  • DC Coupled IF Port.
  • High Level Phase Detector.
  • Impedance: 50 Ohms Nominal.
  • Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C.
  • LO Power: +24 dBm Max.
  • IF Port Current: 50 mA Max.
  • MIL-STD-883 Screening Available.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MD-161-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MD-169 Termination Insensitive Mixer Tyco
MD-169 Termination Insensitive Mixer MACOM
MD-113 High Performance Double-Balanced Mixer Tyco
MD-124 Double-Balanced Mixer Tyco
MD-156 Flatpack Double-Balanced Mixer Tyco

Other Datasheets by MACOM Technology Solutions

Part Number Description
MD-160 Termination Insensitive Mixer
MD-108 Double-Balanced Mixer
MD-123 Double-Balanced Mixer
MD-124 Double-Balanced Mixer
MD-140 Double-Balanced Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MD-161 Termination Insensitive Mixer, 1 - 500 MHz Features  Third Order Intermodulation Ratio is Insensitive to Port Mismatches  Conversion Loss: 6dB Typical Midband  DC Coupled IF Port  High Level Phase Detector  Impedance: 50 Ohms Nominal  Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C  LO Power: +24 dBm Max.  IF Port Current: 50 mA Max.  MIL-STD-883 Screening Available Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.