Datasheet4U Logo Datasheet4U.com

MX25R6435F - 64M-BIT FLASH MEMORY

General Description

Table 1.

Additional Feature7 3.

PIN CONFIGURATIONS 8 4.

Key Features

  • Ultra Low Power Mode and High Performance Mode.
  • Wide Range VCC 1.65V-3.6V for Read, Erase and Program Operations.
  • Unique ID and Secure OTP Support.
  • Multi I/O Support - Single I/O, Dual I/O and Quad I/O.
  • Program Suspend/Resume & Erase Suspend/Resume P/N: PM2138 Macronix Proprietary 1 Rev. 1.5, September 16, 2020 MX25R6435F Contents 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX25924 12V electronic fuse MAXINMICRO
MX25947 24V electronic fuse MAXINMICRO
MX25L1005 1M-BIT [x 1] CMOS SERIAL FLASH Macronix International
MX25L1021E 512K-BIT [x 1] CMOS SERIAL FLASH Memory Macronix International
MX25L1025C 1M-BIT [x 1] CMOS SERIAL FLASH Macronix International

Other Datasheets by Macronix

Part Number Description
MX25R1035F Wide Vcc Range 1M-BIT [x 1/x 2/x 4] CMOS MXSMIO FLASH MEMORY
MX25R1635F Wide Vcc Range 16M-BIT [x 1/x 2/x 4] CMOS MXSMIO FLASH MEMORY
MX25R2035F Wide Vcc Range 2M-BIT [x 1/x 2/x 4] CMOS MXSMIO FLASH MEMORY
MX25R3235F Wide Vcc Range 32M-BIT [x 1/x 2/x 4] CMOS MXSMIO FLASH MEMORY
MX25R4035F Wide Vcc Range 4M-BIT [x 1/x 2/x 4] CMOS MXSMIO FLASH MEMORY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MX25R6435F MX25R6435F ULTRA LOW POWER, 64M-BIT [x 1/x 2/x 4] CMOS MXSMIO® (SERIAL MULTI I/O) FLASH MEMORY Key Features • Ultra Low Power Mode and High Performance Mode • Wide Range VCC 1.65V-3.6V for Read, Erase and Program Operations • Unique ID and Secure OTP Support • Multi I/O Support - Single I/O, Dual I/O and Quad I/O • Program Suspend/Resume & Erase Suspend/Resume P/N: PM2138 Macronix Proprietary 1 Rev. 1.5, September 16, 2020 MX25R6435F Contents 1. FEATURES............................................................................................................................................................... 4 2. GENERAL DESCRIPTION......................................................................................................................................