MX1210F Datasheet | MAXINMICRO

FEATURES MX1210F is a highly integrated current mode PWM - Multi-Mode Operation controller, optimized for high performance, low standby - 65k Hz fixed frequency mode @ Full Load power consumption and wide output voltage range PD - Valley switching operation @ Green mode adapter solutions. The circuit is as well patible with cost effective offline flyback converter applications covering a - Burst Mode @ Light Load and No Load - Adaptive loop gain pensation with Iovp current wide output range. At full loading, the IC operates in fixed frequency mode. When the loading goes low, it operates in Green mode with valley switching for high power conversion efficiency can be detection - Ultra low operation current at light and no load - Internal OCP pensation for universal line voltage - Extend burst mode control for improved efficiency and low achieved in the whole loading range. MX1210F offers plete protection coverage including cycle-by-cycle current limiting (OCP), over load protection (OLP), over temperature protection (OTP), output short current protection (SCP), output and VDD over voltage standby power - Power on soft start reducing MOSFET VDS stress - Frequency shuffling for EMI - Audio noise free operation - prehensive protection coverage protection (OVP & VDD OVP). Excellent EMI performance - VDD under voltage lockout with hysteresis (UVLO) is achieved with MAXIN proprietary frequency shuffling - Cycle-by-cycle over current protection (OCP) with technique. The tone energy at below 22k Hz is minimized to auto recovery avoid audio noise during operation. - External over temperature protection (EXT_OTP) MX1210F is offered in SOT23-6 package. Applications - VDD over voltage protection - Output over voltage protection Battery chargers - Output short current protection (SCP) with auto PD adapters recovery Wide output range adapters - Brownout protection with auto recovery Set-Top Box power supply - Output diode short protection with auto recovery Typical...