MX1210P Datasheet | MAXINMICRO

FEATURES MX1210P is a highly integrated current mode PWM controller, - Multi-Mode Operation optimized for high performance, low standby power - 65k Hz fixed frequency mode @ Full Load consumption and wide output voltage range PD adapter - 130k Hz@Peak load in 40ms solutions. The circuit is as well patible with cost effective - Valley switching operation @ Green mode offline flyback converter applications covering a wide output - Burst Mode @ Light Load and No Load range. - Adaptive loop gain pensation with Iovp current detection At full loading, the IC operates in fixed frequency mode. When - Ultra low operation current at light and no load the loading goes low, it operates in Green mode with valley - Internal OCP pensation for universal line voltage switching for high power conversion efficiency can be - Extend burst mode control for improved efficiency and low achieved in the whole loading range. standby power MX1210P offers plete protection coverage including - Power on soft start reducing MOSFET VDS stress cycle-by-cycle current limiting (OCP), overload protection - Frequency shuffling for EMI (OLP), over temperature protection (OTP), output short - Audio noise free operation current protection (SCP), output and VDD over voltage - prehensive protection coverage protection (OVP & VDD OVP). Excellent EMI performance - VDD under voltage lockout with hysteresis (UVLO) is achieved with MAXIN proprietary frequency shuffling - Cycle-by-cycle over current protection (OCP) with auto technique. The tone energy at below 22k Hz is minimized to recovery avoid audio noise during operation. - External over temperature protection (EXT_OTP) MX1210P is offered in SOT23-6 package. Applications - VDD over voltage protection - Output over voltage protection Battery chargers - Output short current protection (SCP) with auto PD adapters recovery Wide output range adapters - Brownout protection with auto recovery Motor adapter - Output diode short protection...