MX5014S Datasheet | MAXINMICRO

features an internal charge pump that can sustain a gate voltage greater than the available supply voltage. The driver is capable of turning on a logic level MOSFET from 2.75V supply or a standard MOSFET from a 5V supply. The gate to source output voltage is internally limited to approximately 15V. The MX5014S is protected against automotive load dump, reversed battery, and inductive load spikes of -20V. the driver’s overvoltage shutdown feature turns off the external MOSFET at approximately 35V to protect the load against power supply excursions. The MX5014S is available in plastic 8 pin SOP packages. FEATURES - 2.75V to 50V operation supply voltage - 100u A maximum supply current (5V supply) - 15u A typical off-state current - Internal charge pump - TTL patible input - Withstands 65V transient (load dump) Battery Management System Lamp Control Heater Control Power Bus Switching Motor control GENERAL INFORMATION Ordering information Part Number MX5014S Description SOP-8L Package dissipation rating Package SOP-8L RθJA（℃/W） 170 Absolute maximum ratings Parameter Supply voltage Input voltage Source voltage Source current Gate voltage Junction temperature Storage temperature, Tstg Leading temperature （soldering， 10secs） ESD Susceptibility HBM Value -0.7to 60V -0.7to V+ -0.7 to V+ 50m A -0.7 to 55V 150℃ -55 to 150℃ 260℃ ±2000V Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Remended Operating Conditions section is not implied. Remended operating condition Symbol Parameter Supply Supply voltage Junction temperature Power dissipation Range 2.75-50V -40~125℃ 0.59W - Internal 15Vgate clamp protection WUXI MAXIN MICRO 1/8 无锡明芯微电子有限公司 MX5014S 3 to 50V Low Cost High Side or Low Side Gate...