MX5015D22 Datasheet | MAXINMICRO

description The MX5015D22 high-side N_FET driver works with an external MOSFET and acts as an ideal diode rectifier when connected in series with the power supply. This controller enables MOSFETs to replace diode rectifiers in power distribution networks, reducing power loss and voltage drop. The MX5015D22 controller provides charge pump gate drive for an external N-channel MOSFET and fast response parator to turn off the FET when current flows in reverse. The MX5015D22 can be connected with a resistance divider network to achieve the input over voltage protection. Features - Wide operating input voltage range VIN: 5V to 30V - 60V transient voltage - Charge pump gate driver for external N-channel MOSFET - 50ns fast response to current reversal - 2A peak gate off current - Ultra-small VDS turn-off voltage reduces turn-off time - 6-Pin SOT23-6L Applications Active OR-ing of redundant (N+1) power supplies Pre-charge control High side driver Input OVP protection Typical application General information Ordering information Part Number MX5015D22 MPQ Description DFN2- 2 3000pcs Package dissipation rating Package SOT-23 (6) RθJA（℃/W） 108.1 Absolute maximum ratings Parameter VIN, SOURCE Pins to GND GATE Pin to GND EN Pin to Ground OVP Pin to Ground Junction temperature Storage temperature, Tstg Leading temperature （soldering,10secs） ESD Susceptibility HBM Value -0.3 to 60V -0.3 to 70V -0.3 to 7V -0.3 to 7V 150℃ -50 to 150℃ 260℃ ±2000V Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Remended Operating Conditions section is not implied. Marking information Year code Pin1 5015D YYWWA Remended operating condition Symbol VIN, OUT Pins EN, OVP Pin Operating temperature Part number Internal code Week code Range 5-30V 0-5.5V -40~125℃ +5V ~...