Datasheet4U Logo Datasheet4U.com

M75310 - PHOTOELECTRIC SMOKE DETECTOR

General Description

The M75310 is a very low-power IC providing all of the required

Key Features

  • for a photoelectric type smoke detector. This device can be used in conjunction with an infrared photoelectric chamber to sense scattered light from smoke particles. A variable-gain photo amplifier can be directly interfaced to an infrared emitter / detector pair. The amplifier gain levels are Determined by two external capacitors that are then internally selected depending on the operating mode. Low gain is selected during standby and timer modes. During a local alarm this low gain is increased.

📥 Download Datasheet

Datasheet Details

Part number M75310
Manufacturer MOSDESIGN
File Size 114.92 KB
Description PHOTOELECTRIC SMOKE DETECTOR
Datasheet download datasheet M75310 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M750 Counter SGS
M750B1 Counter SGS
M750D1 Counter SGS
M751 Touch Tong Generator SGS
M75176P RS-485 TRANSCEIVER Mitsubishi

Other Datasheets by MOSDESIGN

Part Number Description
M75010 PHOTOELECTRIC SMOKE DETECTOR
M75012 PHOTOELECTRIC SMOKE DETECTOR
M75210 COST-EFFECTIVE PHOTOELECTRIC SMOKE DETECTOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOSDESIGN SEMICONDUCTOR CORP. PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT SMOKE DETECTOR M75310 GENERAL DESCRIPTION The M75310 is a very low-power IC providing all of the required features for a photoelectric type smoke detector. This device can be used in conjunction with an infrared photoelectric chamber to sense scattered light from smoke particles. A variable-gain photo amplifier can be directly interfaced to an infrared emitter / detector pair. The amplifier gain levels are Determined by two external capacitors that are then internally selected depending on the operating mode. Low gain is selected during standby and timer modes. During a local alarm this low gain is increased (internally) by ~ 10% to reduce false triggering.