Datasheet4U Logo Datasheet4U.com

MP2161GJ - Synchronous Step Down Switcher

Download the MP2161GJ datasheet PDF. This datasheet also covers the MP2161 variant, as both devices belong to the same synchronous step down switcher family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP2161 is a monolithic step-down switch mode converter with built-in internal power MOSFETs.

It achieves 2A continuous output current from a 2.5V to 6V input voltage with excellent load and line regulation.

The output voltage can be regulated as low as 0.6V.

Key Features

  • Very Low IQ: 17μA.
  • Default 1.5MHz Switching Frequency.
  • EN and Power Good for Power Sequencing.
  • Wide 2.5V to 6V Operating Input Range Output Adjustable from 0.6V.
  • Up to 2A Output Current.
  • 100% Duty Cycle in Dropout.
  • 100mΩ and 60mΩ Internal Power MOSFET Switches.
  • Cycle-by-Cycle Over Current Protection.
  • Short Circuit Protect with Hiccup Mode.
  • Stable with Low ESR Output Ceramic Capacitors.
  • Available in a TSOT23-8 Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP2161-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP2103K3C10 Safety Standard Capacitor ETC
MP2104K3C30 Safety Standard Capacitor ETC
MP2104K3D20 Safety Standard Capacitor ETC
MP2105K3E60 Safety Standard Capacitor ETC
MP2105K3F20 Safety Standard Capacitor ETC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2161 Synchronous Step Down Switcher
MP21600 Step-Down Converter
MP21600GQD Step-Down Converter
MP2162 COT Synchronous Step Dwon Switcher
MP2162GQH COT Synchronous Step Dwon Switcher

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP2161 is a monolithic step-down switch mode converter with built-in internal power MOSFETs. It achieves 2A continuous output current from a 2.5V to 6V input voltage with excellent load and line regulation. The output voltage can be regulated as low as 0.6V. The Constant-On-Time control scheme provides fast transient response and eases loop stabilization. Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown. The MP2161 is available in the small TSOT23-8 package and requires a minimum number of readily available standard external components. The MP2161 is ideal for a wide range of applications including High Performance DSPs, FPGAs, PDAs, and portable instruments. TYPICAL APPLICATION MP2161 2A, 6V, 1.