Datasheet4U Logo Datasheet4U.com

MP3120 - 1.1MHz Synchronous Boost Converter

General Description

The MP3120 is a high efficiency synchronous, current mode step-up converter.

The device can boost a single cell or two cells AA battery up to 5V.

The MP3120 can start up from an input voltage as low as 0.8V and provide in-rush current limiting as well as output short circuit protection.

Key Features

  • an integrated power MOSFET that supports up to 5V output and a typical 1.2A switch current. The device also can maintain the output voltage regulated even when the input voltage is above the output voltage. The MP3120 is offered in a 6-lead ThinSOT23 package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP312 (MP312 / MP330) Power Film Resistors Caddock
MP30 Power Rheostats Vishay Siliconix
MP3005 Current and Voltage Controls Current Transformer Carlo Gavazzi
MP320A Low Cost Quartz Crystal CTS
MP320A-E Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP3120DJ 1.1MHz Synchronous Boost Converter
MP3202 1.3A Fixed Frequency White LED Driver
MP3204 1.3MHz Fixed Frequency 5-White LED Driver
MP3212 1MHz Step-up Regulator
MP3212DQ 1MHz Step-up Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP3120 1.2A, 1.1MHz Synchronous Boost Converter with Output Disconnect DESCRIPTION The MP3120 is a high efficiency synchronous, current mode step-up converter. The device can boost a single cell or two cells AA battery up to 5V. The MP3120 can start up from an input voltage as low as 0.8V and provide in-rush current limiting as well as output short circuit protection. The integrated P-Channel synchronous rectified switch provides improved efficiency and eliminates the need of an external schottky diode. The P-MOS will disconnect the output from the input when EN is low. This output disconnect feature allows the output to be completely discharged, thus allowing the part to draw less than 1uA off current in shutdown mode. The 1.