Datasheet4U Logo Datasheet4U.com

MP4001 - Universal Input High Brightness White LED Driver

General Description

The MP4001 is a high efficiency step-down converter designed for driving the high brightness Light Emitting Diodes (LEDs).

Key Features

  • no reverse recovery loss in the freewheeling diode, soft turn on with zero-current and valley voltage for the power MOSFET. Such operation mode can achieve very high efficiency and in the same time minimize the inductor value and size. With the boundary conduction control mode, the LED current can be well regulated by control the MOSFET peak current which is sensed through an external resistor. Its low 300mV feedback voltage reduces power loss and improves the efficiency. The MP4001 integrates a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP400 Low Cost Quartz Crystal CTS
MP400-E Low Cost Quartz Crystal CTS
MP4004 Silicon NPN Transistor ETC
MP4005 Power Transistor Toshiba Semiconductor
MP4005 (MP4005 - MP4010) Bridge Rectifier MCC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP4001DS Universal Input High Brightness White LED Driver
MP4000 White LED Driver Controller
MP4000DS White LED Driver Controller
MP4008 High-Current Accuracy WLED Controller
MP4008GS High-Current Accuracy WLED Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP4001 Universal Input High Brightness White LED Driver DESCRIPTION The MP4001 is a high efficiency step-down converter designed for driving the high brightness Light Emitting Diodes (LEDs). The MP4001 drives external MOSFET with boundary conduction mode which features no reverse recovery loss in the freewheeling diode, soft turn on with zero-current and valley voltage for the power MOSFET. Such operation mode can achieve very high efficiency and in the same time minimize the inductor value and size. With the boundary conduction control mode, the LED current can be well regulated by control the MOSFET peak current which is sensed through an external resistor. Its low 300mV feedback voltage reduces power loss and improves the efficiency.