Datasheet4U Logo Datasheet4U.com

MP4816GFP - High-Voltage Analog Switch

Download the MP4816GFP datasheet PDF. This datasheet also covers the MP4816 variant, as both devices belong to the same high-voltage analog switch family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP4816 is a 16-channel, high-voltage, single-pole, single-throw, SPST, analog switch designed for medical ultrasound imaging applications.

The MP4816 is designed to multiplex transmit and receive voltages to and from multiple piezoelectric transducers (PZT).

Key Features

  • No High-Voltage Supplies Required.
  • 16 Channels.
  • Up to ±90V Analog Signals.
  • 12.5Ω Typical Switch Resistance.
  • ±2.0A Typical Switch Peak Current.
  • Off-Isolation of -66dB at 5.0MHz.
  • 80MHz Clock Frequency.
  • Available in a TQFP-48 (7mmx7mm) Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP4816-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP480 Low Cost Quartz Crystal CTS
MP480-E Low Cost Quartz Crystal CTS
MP480A Low Cost Quartz Crystal CTS
MP480A-E Low Cost Quartz Crystal CTS
MP480B Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP4816 High-Voltage Analog Switch
MP4864A SPST Analog Switch
MP4000 White LED Driver Controller
MP4000DS White LED Driver Controller
MP4001 Universal Input High Brightness White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP4816 16-Channel, High-Voltage Analog Switch DESCRIPTION The MP4816 is a 16-channel, high-voltage, single-pole, single-throw, SPST, analog switch designed for medical ultrasound imaging applications. The MP4816 is designed to multiplex transmit and receive voltages to and from multiple piezoelectric transducers (PZT). The output switches are controlled by a 16-bit serial shift register followed by a 16-bit data latch. A data out pin (DOUT) is provided to allow for multiple devices to be cascaded together. This helps minimize the number of input/output (I/O) control lines. A logic high in the data latch turns on the corresponding analog switch. A logic low turns off the corresponding analog switch. The MP4816 does not require any high-voltage supplies.