Datasheet4U Logo Datasheet4U.com

MP5023 - hot-swap protection

Description

The MP5023 is a hot-swap protection device designed to protect circuitry on its output from transients on its input.

The MP5023 also protects its input from undesired shorts and transients coming from its output.

During start-up, inrush current is limited by the slew rate at the output.

Features

  • overvoltage protection (OVP) and under-voltage protection (UVP). The MP5023 is available in a small FCQFN-24 package (4mmx5mm).

📥 Download Datasheet

Datasheet preview – MP5023

📁 Similar Datasheet

  • MP502 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP502M - High Current Glass Passivated Molding Single-Phase Bridge Rectifier (Leshan Radio Company)
  • MP502W - Single Phase Bridge Rectifier (MCC)
  • MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5005 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005W - Single Phase Bridge Rectifier (MCC)
  • MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5009 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
Other Datasheets by MPS
  • MP5025C - Hot-Swap Protection Device
  • MP5025CGQV - Hot-Swap Protection Device
  • MP5026 - 16V 20A Hot-Swap Intelli-Fuse Solution
  • MP5029-C - USB Charging Port Controller
  • MP5029GD-C - USB Charging Port Controller
  • MP5000 - 5A Programmable Current Limit Switch
  • MP5000A - 5A Programmable Current Limit Switch
  • MP5000ADQ - 5A Programmable Current Limit Switch

Full PDF Text Transcription

Click to expand full text
MP5023 16V, 50A, 1.1mΩ, Protection Device with Integrated MOSFET The Future of Analog IC Technology and PMBusTM Interface DESCRIPTION The MP5023 is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5023 also protects its input from undesired shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the output. The slew rate is controlled by the external capacitor at SS. The maximum load at the output is currentlimited through on-die current sense technology. The magnitude of the current limit is controlled by a low-power resistor from ISET to ground. An internal charge pump drives the gate of the power device, allowing for a power MOSFET with a very low on resistance of 1.1mΩ.
Published: |