Datasheet4U Logo Datasheet4U.com

MP5981 - Hot-Swap Intelli-Fuse Solution

Description

The MP5981 is a monolithic, integrated controller and switch that contains a high-side MOSFET and other circuitries that enable it to work in standalone operation or to be controlled by a hot-swap controller.

The MP5981 drives up to 50A of continuous current per device at room temperature.

Features

  • to simplify system design. It provides an integrated current mirror to monitor the output current and on-die temperature sensing, eliminating the need for an external current-sense power resistor, power MOSFET, and thermal sense device. The MP5981 detects the power FET gate, source, and drain short conditions. It can also provide feedback to the hot-swap controller via the fault reporting output (GOK). The MP5981 can be paralleled for higher current.

📥 Download Datasheet

Datasheet preview – MP5981

📁 Similar Datasheet

  • MP5005 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5005 - PRESS-FIT MOTOLOLA DIODES (Shunye)
  • MP5005W - Single Phase Bridge Rectifier (MCC)
  • MP5006 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5007 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5008 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP5009 - 50 Amp Single Phase Bridge Rectifier (Micro Commercial Components)
  • MP500B - Low Cost Quartz Crystal (CTS)
  • MP500B-E - Low Cost Quartz Crystal (CTS)
  • MP501 - PRESS-FIT MOTOLOLA DIODES (Shunye)
Other Datasheets by MPS
  • MP5920 - Hot-Swap Controller and Energy Monitor
  • MP5921 - Hot-Swap Intelli-Fuse Solution
  • MP5990 - Fully Integrated Hot-Swap Solution
  • MP5990GMA - Fully Integrated Hot-Swap Solution
  • MP5000 - 5A Programmable Current Limit Switch
  • MP5000A - 5A Programmable Current Limit Switch
  • MP5000ADQ - 5A Programmable Current Limit Switch
  • MP5000DQ - 5A Programmable Current Limit Switch

Full PDF Text Transcription

Click to expand full text
DESCRIPTION The MP5981 is a monolithic, integrated controller and switch that contains a high-side MOSFET and other circuitries that enable it to work in standalone operation or to be controlled by a hot-swap controller. The MP5981 drives up to 50A of continuous current per device at room temperature. With air flow, the continuous current can reach 60A. The MP5981 limits the inrush current to the load when a circuit card is inserted into a live backplane power source, thereby limiting the backplane’s voltage drop. The MP5981 limits the internal MOSFET current by controlling the gate voltage through the current limit reference input and soft-start ramp. The MP5981 offers many features to simplify system design.
Published: |