Datasheet4U Logo Datasheet4U.com

MP6005GK - High-Efficiency Flyback/Forward Controller

Download the MP6005GK datasheet PDF. This datasheet also covers the MP6005 variant, as both devices belong to the same high-efficiency flyback/forward controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP6005 is a high-power, high-efficiency flyback and forward controller.

It is specifically designed as a low-cost, small, isolated solution with primary-side regulation (PSR) for flyback application, and high-efficiency secondary-side regulation (SSR) for active-clamped forward application.

Key Features

  • Primary-Side Regulated Flyback without Optocoupler Feedback.
  • Synchronous Gate Driver (SYNC) Provides High Efficiency for Active-Clamped Forward Topology.
  • Wide 8V to 80V Input Voltage Range.
  • Internal Circuit Supply Compatible with 16V External Power.
  • 2A GATE and 0.8A SYNC Drivers.
  • 160mV Switching Current-Sense (CS) Limit.
  • Output Diode Compensation in Primary- Side Regulation (PSR) Mode.
  • 250kHz Fixed Switching Frequency.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP6005-MPS.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP6005 High-Efficiency Flyback/Forward Controller with Primary and Secondary-Side Regulation DESCRIPTION The MP6005 is a high-power, high-efficiency flyback and forward controller. It is specifically designed as a low-cost, small, isolated solution with primary-side regulation (PSR) for flyback application, and high-efficiency secondary-side regulation (SSR) for active-clamped forward application. The MP6005 can also be used in SSR for flyback topology. In PSR mode, the MP6005 senses the third winding waveform on the primary side to regulate the output and save the optocoupler and TL431 feedback circuit from SSR application.