Datasheet4U Logo Datasheet4U.com

MPM3814C - Ultra-Small Power Module

General Description

The MPM3814C is synchronous, step-down power module with an integrated inductor.

The MPM3814C achieves 1A of continuous output current (IOUT) from a 2.75V to 6V input voltage (VIN) range, with excellent load and line regulation.

Key Features

  • include cycle-by-cycle current limiting, short-circuit protection (SCP) with hiccup mode, and thermal shutdown. The MPM3814C requires a minimal number of readily available, standard external components. It is available in an ultra-small ECLGA-14 (2.5mmx2.5mmx1.2mm) package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPM3002 TMOS ICePAK Power-Module Motorola
MPM3003 ICE PAK POWER-MODULE Motorola
MPM3201 (MPM Series) Rotary Motors Parker
MPM3202 (MPM Series) Rotary Motors Parker
MPM3203 (MPM Series) Rotary Motors Parker

Other Datasheets by Monolithic Power Systems

Part Number Description
MPM3814CGPA Ultra-Small Power Module
MPM3810 1.2A Module Synchronous Step-Down Converter
MPM3810A 1.2A Synchronous Step-Down Converter
MPM3810GQB 1.2A Module Synchronous Step-Down Converter
MPM3811 1A Power Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MPM3814C 2.75V to 6V, 1A, Ultra-Small Power Module with Ultra-Low Noise DESCRIPTION The MPM3814C is synchronous, step-down power module with an integrated inductor. The MPM3814C achieves 1A of continuous output current (IOUT) from a 2.75V to 6V input voltage (VIN) range, with excellent load and line regulation. The MPM3814C works in forced continuous conduction mode (FCCM) and has a small output voltage (VOUT) ripple with one output capacitor. This makes the device wellsuited for optical modules, FPGA, ASIC, and other applications requiring low ripple noise and a small PCB area. VOUT can be regulated to be as low as 0.6V. Only FB resistors, input capacitors, and output capacitors are required to complete the design.