Datasheet4U Logo Datasheet4U.com

MPQ5074 - Load Switch

General Description

The MPQ5074 provides up to 3A of load current (ILOAD) across a 1.2V to 5.5V input voltage (VIN) range.

Key Features

  • a configurable soft-start time (tSS), output discharge, over-current protection (OCP) and thermal shutdown. The maximum ILOAD at the output (source) is current-limited by the sense FET topology. The current limit (ILIMIT) magnitude is controlled by an external resistor connected between the ILIM pin and ground. An internal charge pump drives the power device’s gate, allowing for a 10mΩ low-RDS(ON) DMOS power MOSFET. The MPQ5074 is available in a tiny QFN-13 (2.5mmx3mm) package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPQ1000 Quad Amplifier Transistor Motorola
MPQ1500 Quad Transistor Motorola
MPQ2221 NPN Transistor Motorola
MPQ2222 QUAD TRANSISTORS Central
MPQ2222 Quad Transistors Motorola Semiconductor

Other Datasheets by Monolithic Power Systems

Part Number Description
MPQ5072 programmable load switch
MPQ5066 Hot-Swap Protection
MPQ5068 Hot-Swap Protection
MPQ5069 Protection Switch
MPQ5850 36V Smart Diode Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MPQ5074 5.5V, 3A, Low-RDS(ON) Load Switch with a Configurable Current Limit, AEC-Q100 Qualified DESCRIPTION The MPQ5074 provides up to 3A of load current (ILOAD) across a 1.2V to 5.5V input voltage (VIN) range. The low on resistance (RDS(ON)) and tiny package make the MPQ5074 a highly efficient and space-saving solution for automotive infotainment systems, clusters, and advanced driver-assistance systems (ADAS). The MPQ5074 employs soft start (SS) to reduce inrush current during circuit start up. It also features a configurable soft-start time (tSS), output discharge, over-current protection (OCP) and thermal shutdown. The maximum ILOAD at the output (source) is current-limited by the sense FET topology.