Datasheet4U Logo Datasheet4U.com

MPQ6610 - Half-Bridge Power Driver

General Description

The MPQ6610 is a half-bridge driver with current measurement and regulation

Key Features

  • It can operate from a 4V to 55V supply voltage, and can deliver up to 3A of output current (depending on the package, PCB design, and ambient temperature). The MPQ6610 can be used to drive brushed DC motors, solenoids, or other loads. An internal current-sense circuit provides an output with a voltage that is proportional to the load current. Cycle-by-cycle current regulation and limiting are also provided. These features do not require the use of a low-Ohmic shunt resistor. Internal diagnostic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPQ6600 Quad Complementary Pair Transistors Motorola Semiconductor
MPQ6600A Quad Complementary Pair Transistors Motorola
MPQ6600A1 Quad Complementary Pair Transistors Motorola
MPQ6001 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola
MPQ6002 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola

Other Datasheets by Monolithic Power Systems

Part Number Description
MPQ6612A H-Bridge DC Motor Driver
MPQ6612A-D H-Bridge DC Motor Driver
MPQ6614-AEC1 H-Bridge DC Motor Driver
MPQ6614GDE-AEC1 H-Bridge DC Motor Driver
MPQ6626 Hex Half-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MPQ6610 55V, 3A, Half-Bridge Power Driver, AEC-Q100 Qualified DESCRIPTION The MPQ6610 is a half-bridge driver with current measurement and regulation features. It can operate from a 4V to 55V supply voltage, and can deliver up to 3A of output current (depending on the package, PCB design, and ambient temperature). The MPQ6610 can be used to drive brushed DC motors, solenoids, or other loads. An internal current-sense circuit provides an output with a voltage that is proportional to the load current. Cycle-by-cycle current regulation and limiting are also provided. These features do not require the use of a low-Ohmic shunt resistor. Internal diagnostic and protection features include open-load detection, over-current protection (OCP), under-voltage lockout (UVLO), and thermal shutdown.