Datasheet4U Logo Datasheet4U.com

MAP3702 - 600kHz 1-CH White LED Driver

Description

MAP3702 is an 1-channel LED driver optimized for LED backlight application targeting mobile LCD module.

MAP3702 uses 40V absolute Max.

rating boost MOSFET internally and input voltage is ranged from 2.7V ~ 5.5V.

Features

  • 2.7V to 5.5V input voltage range 37V open LED protection Up to 90% Efficiency 600k.

📥 Download Datasheet

Datasheet preview – MAP3702

Datasheet Details

Part number MAP3702
Manufacturer MagnaChip
File Size 2.39 MB
Description 600kHz 1-CH White LED Driver
Datasheet download datasheet MAP3702 Datasheet
Additional preview pages of the MAP3702 datasheet.

📁 Similar Datasheet

  • MAP30 - Universal Input 85-264 VAC (Power-One)
  • MAP30-1005 - Universal Input 85-264 VAC (Power-One)
  • MAP-AM-265 - Micro Air Pump Motor (MITSUMI)
  • MAP-CA - Digital Signal Processor Chip (Equator Technologies)
  • MAP100 - High Voltage DC Contactors (TE)
  • MAP100RBAFE - High Voltage DC Contactors (TE)
  • MAP101 - High Voltage DC Contactors (TE)
  • MAP101RBAFE - High Voltage DC Contactors (TE)
  • MAP110 - MAP110 SERIES (Power-One)
  • MAP130 - Automatic 115/230 Input Voltage Selection (Power-One)
Other Datasheets by MagnaChip
  • MAP3201 - High current switch mode PWM LED Driver
  • MAP3202 - High Efficiency Switch Mode LED Driver
  • MAP3204 - 4-channel LED Driver
  • MAP3205 - 4-channel LED Driver
  • MAP3222 - Dual Channel High Brightness LED Driver
  • MAP3232 - Dual Channel Switch Mode Operating LED Driver
  • MAP3242 - 4-channel LED Driver
  • MAP3249 - 4-channel LED Driver

Full PDF Text Transcription

Click to expand full text
MAP3702 – 600kHz 1-CH White LED Driver for Mobile Backlight Confidential Datasheet Version 1.1 Preliminary Datasheet - MAP3702 600kHz 1-CH White LED Driver for Mobile Backlight General Description MAP3702 is an 1-channel LED driver optimized for LED backlight application targeting mobile LCD module. MAP3702 uses 40V absolute Max. rating boost MOSFET internally and input voltage is ranged from 2.7V ~ 5.5V. The boost converter runs at 600kHz fixed switching frequency. The default LED current is set by external resistor and the feedback voltage is regulated up to 200mV. Two dimming controls are available; 32 dimming steps using the SWIRE interface and filtered-PWM control.
Published: |