Datasheet4U Logo Datasheet4U.com

DS1340 - I2C RTC

General Description

The DS1340 is a real-time clock (RTC)/calendar that is pin compatible and functionally equivalent to the ST M41T00, including the software clock calibration.

The device additionally provides trickle-charge capability on the VBACKUP pin, a lower timekeeping voltage, and an oscillator STOP flag.

Key Features

  • Enhanced Second Source for the ST M41T00.
  • Completely Manages All Timekeeping Functions.
  • RTC Counts Seconds, Minutes, Hours, Day, Date, Month, and Year.
  • Software Clock Calibration.
  • Oscillator Stop Flag.
  • Low-Power Operation Extends Battery Backup Run Time.
  • Low Timekeeping Voltage Down to 1.3V.
  • Automatic Power-Fail Detect and Switch Circuitry.
  • Trickle-Charge Capability.
  • Three Operating Voltage Ranges (1.8V, 3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1345BL 1024K Nonvolatile SRAM Dallas Semiconducotr
DS1345W 1024k Nonvolatile SRAM Dallas Semiconducotr
DS1345YL 1024K Nonvolatile SRAM Dallas Semiconducotr
DS1347 SPI-Compatible Real-Time Clock Maxim Integrated
DS1300-3 AC-DC / Distributed Power Front-End 2U Emerson

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS1341 (DS1341 / DS1342) Low-Current I2C RTCs
DS1342 (DS1341 / DS1342) Low-Current I2C RTCs
DS1343 (DS1343 / DS1344) Low-Current SPI/3-Wire RTCs
DS1344 (DS1343 / DS1344) Low-Current SPI/3-Wire RTCs
DS1345AB 1024k Nonvolatile SRAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS1340 I2C RTC with Trickle Charger General Description The DS1340 is a real-time clock (RTC)/calendar that is pin compatible and functionally equivalent to the ST M41T00, including the software clock calibration. The device additionally provides trickle-charge capability on the VBACKUP pin, a lower timekeeping voltage, and an oscillator STOP flag. Block access of the register map is identical to the ST device. Two additional registers, which are accessed individually, are required for the trickle charger and flag. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. A built-in power-sense circuit detects power failures and automatically switches to the backup supply. Reads and writes are inhibited while the clock continues to run.