Datasheet4U Logo Datasheet4U.com

DS1862 - XFP Laser Control and Digital Diagnostic IC

Description

The DS1862 is a closed-loop laser-driver control IC with built-in digital diagnostics designed for XFP MSA.

The laser control function incorporates average power control (APC) and allows extinction ratio control though a temperature indexed look-up table (LUT).

Features

  • Implements XFP MSA Requirements for Digital Diagnostics, Serial ID, and User Memory.
  • I2C-Compatible Serial Interface.
  • Automatic Power Control (APC).
  • Extinction Ratio Control with Look-Up Table.
  • Seven Monitored Channels for Digital Diagnostics (Five Basic Plus Two Auxiliary).
  • Internal Calibration of Monitored Channels (Temp, VCC2/3, Bias Current, Transmitted, and Received Power).
  • Programmable Quick-Trip Logic for Turning Off Laser fo.

📥 Download Datasheet

Datasheet preview – DS1862

Datasheet Details

Part number DS1862
Manufacturer Maxim Integrated Products
File Size 553.50 KB
Description XFP Laser Control and Digital Diagnostic IC
Datasheet download datasheet DS1862 Datasheet
Additional preview pages of the DS1862 datasheet.

📁 Similar Datasheet

  • DS1866 - Log Trimmer Potentiometer (Dallas Semiconducotr)
  • DS1867 - Dual Digital Potentiometer with EEPROM (Dallas Semiconducotr)
  • DS1868 - Dual Digital Potentiometer Chip (Dallas Semiconducotr)
  • DS1869 - 3V Dallastat Electronic Digital Rheostat (Dallas Semiconducotr)
  • DS1800 - Dual Inverting Log Gain/Attenuator (Dallas Semiconducotr)
  • DS1800-3 - AC-DC / Distributed Power Front-End 1U (Emerson)
  • DS1801 - Dual Audio Taper Potentiometer (Dallas Semiconducotr)
  • DS1802 - Dual Audio Taper Potentiometer (Dallas Semiconducotr)
  • DS1803 - Addressable Dual Digital Potentiometer (Maxim Integrated)
  • DS1804 - Nonvolatile Trimmer Potentiometer (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • DS1862A - XFP Laser Control and Digital Diagnostic IC
  • DS1863 - Burst Mode PON Controller
  • DS1864 - SFP Laser Controller and Diagnostic IC
  • DS1865 - PON Triplexer Control and Monitoring Circuit
  • DS1825 - Programmable Resolution 1-Wire Digital Thermometer
  • DS1831 - Multisupply Micromonitor
  • DS1831A - Multisupply Micromonitor
  • DS1831B - Multisupply Micromonitor

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Rev 0; 2/06 XFP Laser Control and Digital Diagnostic IC General Description The DS1862 is a closed-loop laser-driver control IC with built-in digital diagnostics designed for XFP MSA. The laser control function incorporates average power control (APC) and allows extinction ratio control though a temperature indexed look-up table (LUT). The DS1862 monitors up to seven analog inputs, including temperature and monitor diode (MD) current, which are used to regulate the laser bias current and extinction ratio. Warning and alarm thresholds can be programmed to generate an interrupt if monitored signals exceed tolerance. Calibration is also provided internally using independent gain and offset scaling registers for each of the monitored analog signals.
Published: |