MAX13026 Datasheet | Maxim Integrated

Description The MAX13013- MAX13017/MAX3023- MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side of the device, and vice-versa. The MAX13013 single-, the MAX13014- MAX13017 dual-, and the MAX3023- MAX3028 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023- MAX3028 (TSSOP package) quad-level translators feature EN and EN inputs. When disabled, each device places all inputs/outputs on both sides in tri-state and reduces the VCC supply current to 0.03µA, and the VL supply current to 0.1µA. These devices operate at a guaranteed 100Mbps data rate for VL > 1.8V. The MAX13013- MAX13017/MAX3023- MAX3028 accept a +1.65V to +3.6V VCC voltage and a +1.2V to (VCC 0.4V) VL voltage, making them ideal for data transfer between low-voltage ASICs/programmable logic devices (PLDs) and higher voltage systems. The MAX13013 is available in 3 x 2 UCSP and 6-pin SC70 packages. The MAX13014- MAX13017 are available in 3 x 3 UCSP and 8-pin SOT23 packages. The MAX3023- MAX3028 are available in 4 x 3 UCSP and 14-pin TSSOP packages. All devices operate over the extended -40°C to +85°C temperature range. Features - 100Mbps Guaranteed Data Rate - Bidirectional Level Translation MAX13013 (Single) MAX13014 (Dual) MAX3023 (Quad) - Unidirectional Level Translation MAX13015/MAX13016/MAX13017 (Dual) MAX3024- MAX3028 (Quad) - VL Operation Down to +1.2V - Ultra-Low 0.1µA Supply Current When Disabled - Low-Quiescent Current (0.1µA) - UCSP, SC70, SOT23, and TSSOP Packages MAX13013- MAX13017/MAX3023- MAX3028 Pin Configurations TOP VIEW VCC 1 6 EN A VCC GND 2 I/O VCC1 GND 1 2 3 MAX13013 VL B MAX13013 VL I/O VL1 EN I/O VCC1 3 I/O VL1 SC70 3 x 2 UCSP TOP VIEW (BUMPS ON BOTTOM OF DIE) Typical...