Datasheet4U Logo Datasheet4U.com

MAX13050 - Industry-Standard High-Speed CAN Transceivers

General Description

The MAX13050/MAX13052/MAX13053/MAX13054 are pin-for-pin compatible, industry-standard, high-speed, control area network (CAN) transceivers with extended ±80V fault protection.

These products are ideal automotive and industrial network applications where overvoltage protection is required.

Key Features

  • a silent mode that disables the transmitter. The MAX13053 also has a reference output that can be used to bias the input of older CAN controllers that have a differential comparator. The MAX13054 has a separate dedicated logic input, VCC2, allowing interfacing with a +3.3V microcontroller. The MAX13050/MAX13052/MAX13053/MAX13054 are available in an 8-pin SO package and are specified to operate in the -40°C to +85°C and the -40°C to +125°C temperature ranges. Features.
  • Fully Compatible.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1305 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs Maxim
MAX13051 Fault-Protected Can Transceiver Maxim Integrated
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13001E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX13052 Industry-Standard High-Speed CAN Transceivers
MAX13053 Industry-Standard High-Speed CAN Transceivers
MAX13054 Industry-Standard High-Speed CAN Transceivers
MAX13055E (MAX13055E - MAX13058E) High-Speed LLT
MAX13056E (MAX13055E - MAX13058E) High-Speed LLT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3598; Rev 0; 2/05 Industry-Standard High-Speed CAN Transceivers with ±80V Fault Protection General Description The MAX13050/MAX13052/MAX13053/MAX13054 are pin-for-pin compatible, industry-standard, high-speed, control area network (CAN) transceivers with extended ±80V fault protection. These products are ideal automotive and industrial network applications where overvoltage protection is required. These CAN transceivers provide a link between the CAN protocol controller and the physical wires of the bus lines in a CAN. These devices can be used for +12V/+42V battery, automotive, and DeviceNet® applications, requiring data rates up to 1Mbps.