MAX13058E Datasheet | Maxim Integrated

19-4813; Rev 0; 7/09 1.62V to 3.6V, 8-Channel, High-Speed LLT General Description The MAX13055E- MAX13058E 8-channel, bidirectional level translators provide the level shifting necessary for 100Mbps data transfer in multivoltage systems. The MAX13055E- MAX13058E are ideal for level translation in systems with 8 channels. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic-high signals presented on the VL side of the device appear as a logic-high signal on the VCC side of the device and vice versa. The MAX13055E- MAX13058E operate at full speed with external drivers that source as little as 4m A output current or larger. Each input/output (I/O) channel is pulled up to VCC or VL by an internal 40µA current source, allowing the MAX13055E- MAX13058E to be driven by either push-pull or open-drain drivers. The MAX13055E- MAX13058E feature an enable (EN) input to place the device into a low-power shutdown mode when driven low. In addition, the MAX13055E- MAX13058E feature an automatic shutdown mode that disables the part when V CC is less than V L . Each device has a different I/O VL_ and I/O VCC_ state during shutdown mode (see the Ordering Information/Selector Guide). The MAX13055E- MAX13058E operate with VCC voltages from +2.2V to +3.6V and VL voltages from +1.62V to +3.2V, making them ideal for data transfer between lowvoltage ASIC/PLDs and higher voltage systems. The MAX13055E- MAX13058E are available in 0.4mm pitch, 24-bump WLP and 28-pin TQFN (3.5mm x 5.5mm) packages. The MAX13055E- MAX13058E operate over the extended -40°C to +85°C temperature range. o 100Mbps Guaranteed Data Rate o 8 Bidirectional Channels o +1.62V ≤ VL ≤ +3.2V and +2.2V ≤ VCC ≤ +3.6V Supply Voltage Range o 24-Bump WLP (0.4mm Pitch) Lead-Free Package o 28-Pin TQFN (3.5mm x 5.5mm) Lead-Free Package o Extended ESD Protection on I/O VCC Lines ±15k V per Human Body Model ±15k V IEC 61000-4-2 Air Discharge ±8k V IEC 61000-4-2 Contact Discharge Features o patible...