Datasheet4U Logo Datasheet4U.com

MAX1338 - Simultaneous-Sampling ADC

General Description

The MAX1338 14-bit, analog-to-digital converter (ADC) offers four simultaneously sampled, fully differential input channels, with independent track-and-hold (T/H) circuitry for each channel.

The input channels are individually software programmable for input ranges of ±10V, ±5V, ±2.5V, and ±1.25V.

Key Features

  • two power-saving modes: standby mode and shutdown mode. Standby mode allows rapid wake-up and reduces quiescent current to 4mA (typ), and shutdown mode reduces sleep current to less than 10µA (typ). The MAX1338 is available in an 8mm x 8mm x 0.8mm, 56-pin, thin QFN package. The device operates over the extended -40°C to +85°C temperature range.
  • 150ksps Sample Rate per Channel.
  • All Four Input Channels Simultaneously Sampled 16ns Aperture Delay 100ps Aperture-Delay Matching.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX133 3 Digit DMM Circuit Maxim
MAX13335E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX13336E Dual Automotive Differential Audio Receivers Maxim Integrated
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1330 12-/16-Bit DASs
MAX1332 (MAX1332 / MAX1333) True-Differential 12-Bit ADCs
MAX13325 Dual Automotive Audio Line Drivers
MAX13326 Dual Automotive Audio Line Drivers
MAX1333 (MAX1332 / MAX1333) True-Differential 12-Bit ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3151; Rev 1; 7/04 14-Bit, 4-Channel, Software-Programmable, Multiranging, Simultaneous-Sampling ADC General Description The MAX1338 14-bit, analog-to-digital converter (ADC) offers four simultaneously sampled, fully differential input channels, with independent track-and-hold (T/H) circuitry for each channel. The input channels are individually software programmable for input ranges of ±10V, ±5V, ±2.5V, and ±1.25V. The input channels feature fault tolerance to ±17V. The internal T/H circuits have a 16ns aperture delay and 100ps aperture-delay matching. A 14-bit parallel bus provides the conversion result with a maximum per-channel output rate of 150ksps (600ksps for all four channels). The MAX1338 has an on-board oscillator and 2.5V internal reference.