Datasheet4U Logo Datasheet4U.com

MAX17101 - Step-Down Controller

General Description

The MAX17101 is a dual Quick-PWM™ step-down power-supply (SMPS) controller with synchronous rectification, intended for main 5V/3.3V power generation in battery-powered systems.

Key Features

  • this current limit ensures robust output supplies. The 5V/3.3V SMPS outputs can save power by operating in pulse-skipping mode or in ultrasonic mode to avoid audible noise. Ultrasonic mode forces the controller to maintain switching frequencies greater than 20kHz at light loads. An internal 100mA linear regulator can be used to either generate the 5V bias needed for power-up or other lower power “always-on” suspend supplies. An independent bypass input allows automatic bypassing of the linear r.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1710 High-Speed / Digitally Adjusted Step-Down Controllers Maxim
MAX17103 DC-DC Converter Maxim Integrated
MAX17105 8-String WLED Driver Maxim
MAX17108 10-Channel High-Voltage Scan Driver and VCOM Amplifier Maxim
MAX17109 High-Voltage Scan Driver Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17112 DC-DC Converter
MAX17117 Internal-Switch Boost Regulator
MAX17120 Triple High-Voltage Scan Driver
MAX17121 Dual High-Voltage Scan Drivers
MAX17122 Boost-Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4243; Rev 1; 2/09 www.DataSheet4U.com ATION KIT EVALU BLE AVAILA Dual Quick-PWM, Step-Down Controller with Low-Power LDO, RTC Regulator General Description The MAX17101 is a dual Quick-PWM™ step-down power-supply (SMPS) controller with synchronous rectification, intended for main 5V/3.3V power generation in battery-powered systems. Low-side MOSFET sensing provides a simple low-cost, highly efficient current sense for providing valley current-limit protection. Combined with the output overvoltage and undervoltage protection features, this current limit ensures robust output supplies. The 5V/3.3V SMPS outputs can save power by operating in pulse-skipping mode or in ultrasonic mode to avoid audible noise.