Datasheet4U Logo Datasheet4U.com

MAX5062 - Half-Bridge MOSFET Drivers

General Description

The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive highand low-side MOSFETs in high-voltage applications.

These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5069 High-Frequency / Current-Mode PWM Controller Maxim Integrated
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5060 Average-Current-Mode DC-DC Controllers
MAX5061 Average-Current-Mode DC-DC Controllers
MAX5063 Half-Bridge MOSFET Drivers
MAX5064 Half-Bridge MOSFET Drivers
MAX5065 (MAX5065 / MAX5067) Average-Current-Mode Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3502; Rev 5; 5/07 MAX5062/MAX5063/MAX5064 125V/2A, High-Speed, Half-Bridge MOSFET Drivers General Description The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive highand low-side MOSFETs in high-voltage applications. These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ). The high-voltage operation with very low and matched propagation delay between drivers, and high source/sink current capabilities in a thermally enhanced package make these devices suitable for the high-power, high-frequency telecom power converters. The 125V maximum input voltage range provides plenty of margin over the 100V input transient requirement of telecom standards.