MAX5065 Datasheet | Maxim Integrated

Description The MAX5065/MAX5067 dual-phase, PWM controllers provide high-output-current capability in a pact package with a minimum number of external ponents. The MAX5065/MAX5067 utilize a dual-phase, average-current-mode control that enables optimal use of low RDS(ON) MOSFETs, eliminating the need for external heatsinks even when delivering high output currents. Differential sensing enables accurate control of the output voltage, while adaptive voltage positioning provides optimum transient response. An internal regulator enables operation with input voltage ranges of +4.75V to +5.5V or +8V to +28V. The high switching frequency, up to 500k Hz per phase, and dual-phase operation allow the use of low-output inductor values and input capacitor values. This acmodates the use of PC boardembedded planar magnetics achieving superior reliability, current sharing, thermal management, pact size, and low system cost. The MAX5065/MAX5067 also feature a clock input (CLKIN) for synchronization to an external clock, and a clock output (CLKOUT) with programmable phase delay (relative to CLKIN) for paralleling multiple phases. The MAX5065/MAX5067 also limit the reverse current if the bus voltage bees higher than the regulated output voltage. These devices are specifically designed to limit current sinking when multiple power-supply modules are paralleled. The MAX5065 offers an adjustable +0.6V to +3.3V output voltage. The MAX5067 output voltage is adjustable from +0.8V to +3.3V and features an overvoltage protection and a power-good output signal. The MAX5065/MAX5067 operate over the extended temperature range (-40°C to +85°C). The MAX5065 is available in a 28-pin SSOP package. The MAX5067 is available in a 44-pin thin QFN package. Refer to the MAX5037A data sheet for a VRM 9.0/VRM 9.1-patible, VID-controlled output voltage controller in a 44-pin QFN package. Features o +4.75V to +5.5V or +8V to +28V Input Voltage Range o Adjustable VOUT +0.6V to +3.3V (MAX5065) +0.8V to +3.3V...