Datasheet4U Logo Datasheet4U.com

MAX5075 - Push-Pull FET Driver

General Description

The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies.

The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative or positive voltages.

Key Features

  • a programmable, accurate, integrated oscillator with a synchronizing clock output that synchronizes an external PWM regulator. A single external resistor programs the internal oscillator frequency from 50kHz to 1.5MHz. The MAX5075 incorporates a dual MOSFET driver with ±3A peak drive currents and 50% duty cycle. The MOSFET driver generates complementary signals to drive external ground-referenced n-channel MOSFETs. The MAX5075 is available with a clock output frequency to MOSFET driver frequency.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX507 Voltage-Output / 12-Bit DACs with Internal Reference Maxim
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5070 (MAX5070 / MAX5071) Current-Mode PWM Controllers
MAX5071 (MAX5070 / MAX5071) Current-Mode PWM Controllers
MAX5072 Dual-Output Buck or Boost Converter
MAX5073 Dual-Output Buck or Boost Converter
MAX5074 Power IC with Integrated MOSFETs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3662; Rev 0; 5/05 www.DataSheet4U.com Push-Pull FET Driver with Integrated Oscillator and Clock Output General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative or positive voltages. This device features a programmable, accurate, integrated oscillator with a synchronizing clock output that synchronizes an external PWM regulator. A single external resistor programs the internal oscillator frequency from 50kHz to 1.5MHz. The MAX5075 incorporates a dual MOSFET driver with ±3A peak drive currents and 50% duty cycle.