Datasheet4U Logo Datasheet4U.com

MAX5080 - 1A / 40V / MAXPower Step-Down DC-DC Converters

General Description

The MAX5080/MAX5081 are 250kHz PWM step-down DC-DC converters with an on-chip, 0.3 Ω high-side switch.

The input voltage range is 4.5V to 40V for the MAX5080 and 7.5V to 40V for the MAX5081.

The output is adjustable from 1.23V to 32V and can deliver up to 1A of load current.

Key Features

  • include cycle-bycycle current limit, hiccup-mode output short-circuit protection, and thermal shutdown. Both devices are available in a space-saving, high-power (2.7W), 16-pin TQFN package and are rated for operation over the -40°C to +125°C temperature range. Features.
  • 4.5V to 40V (MAX5080) or 7.5V to 40V (MAX5081) Input Voltage Range.
  • 1A Output Current.
  • VOUT Range From 1.23V to 32V.
  • Internal High-Side Switch.
  • Fixed 250kHz Internal Oscillator.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim
MAX5013 12-Bit / 100Msps TTL DAC Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5081 1A / 40V / MAXPower Step-Down DC-DC Converters
MAX5082 1.5A / 40V / MAXPower Step-Down DC-DC Converters
MAX5083 1.5A / 40V / MAXPower Step-Down DC-DC Converters
MAX5084 Low-Quiescent-Current Linear Regulators
MAX5085 Low-Quiescent-Current Linear Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3656; Rev 1; 2/07 www.DataSheet4U.com 1A, 40V, MAXPower Step-Down DC-DC Converters General Description The MAX5080/MAX5081 are 250kHz PWM step-down DC-DC converters with an on-chip, 0.3 Ω high-side switch. The input voltage range is 4.5V to 40V for the MAX5080 and 7.5V to 40V for the MAX5081. The output is adjustable from 1.23V to 32V and can deliver up to 1A of load current. Both devices utilize a voltage-mode control scheme for good noise immunity in the high-voltage switching environment and offer external compensation allowing for maximum flexibility with a wide selection of inductor values and capacitor types. The switching frequency is internally fixed at 250kHz and can be synchronized to an external clock signal through the SYNC input.