Datasheet4U Logo Datasheet4U.com

MAX5084 - Low-Quiescent-Current Linear Regulators

General Description

The MAX5084/MAX5085 high-voltage linear regulators operate from an input voltage range of 6.5V to 65V and deliver up to 200mA of output current.

These devices consume only 50µA (typ) of quiescent current with no load and 6µA (typ) in shutdown (EN pulled low).

Key Features

  • Wide Operating Input Voltage Range (6.5V to 65V).
  • Thermally Enhanced 3mm x 3mm 6-Pin TDFN Package Dissipates 1.905W at +70°C.
  • Guaranteed 200mA Output Current.
  • 50µA No-Load Supply Current.
  • Preset 3.3V, 5.0V, or Adjustable (from 2.54V to 11V) Output Voltage.
  • Remote Load Sense.
  • Thermal and Short-Circuit Protection.
  • -40°C to +125°C Operating Temperature Range.
  • SET Input for Adjustable Output Voltage.
  • Enable In.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim
MAX5013 12-Bit / 100Msps TTL DAC Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5080 1A / 40V / MAXPower Step-Down DC-DC Converters
MAX5081 1A / 40V / MAXPower Step-Down DC-DC Converters
MAX5082 1.5A / 40V / MAXPower Step-Down DC-DC Converters
MAX5083 1.5A / 40V / MAXPower Step-Down DC-DC Converters
MAX5085 Low-Quiescent-Current Linear Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3928; Rev 0; 1/06 65V, 200mA, Low-Quiescent-Current Linear Regulators in TDFN General Description The MAX5084/MAX5085 high-voltage linear regulators operate from an input voltage range of 6.5V to 65V and deliver up to 200mA of output current. These devices consume only 50µA (typ) of quiescent current with no load and 6µA (typ) in shutdown (EN pulled low). Both devices include a SET input, which when connected to ground, selects a preset output voltage of 5V (MAX5084) or 3.3V (MAX5085). Alternatively, the output voltage can be adjusted from 2.54V to 11V by connecting the SET pin to the regulator’s output through a resistive divider network.